FAQs
FAQs
How does microneedling work?
The SKINDELUX device slides along the skin and penetrates the upper layers of your skin to create micro-wounds. These wounds trigger a healing response from the body, which responds by producing collagen and elastin fibers. Over time, the skin becomes fuller and reduces the appearance of fine lines and scarring.
Which conditions does microneedling treat?
Microneedling can treat a range of conditions, with some of the most common including: mild to moderate acne scarring, fine lines and wrinkles, sagging skin, uneven skin tone (hyperpigmentation), skin texture and stretch marks.
Which device should I purchase?
Choosing your device comes down to personal preference and your budget. All SKINDELUX devices have a needle depth which ranges from 0mm – 2.5mm. Some devices are directed more towards certain skin concerns, such as scarring or anti-aging, which will be demonstrated in their title. However, this doesn't mean it's the only device which works for that specific skin care issue — it just means it's the ideal device for that particular skin concern. This is usually to do with one or two features. For example, some models have finer needles which are ideal for treating scars.
What will I look like post-treatment?
You will experience some redness and mild swelling for 24–48 hours post-treatment. It's also normal to see small pinpoint bleeding and mild bruising. After a few days your skin will be a little dry and flakey, which will gradually disappear within one week.
What is the downtime?
It's recommended you don't use your SKINDELUX device 3–5 days before an event as you will experience mild redness, pinpoint bleeding, swelling and bruising for a few days after treatment.
Is it painful?
The level of discomfort you experience will depend on the needle length you choose to use, as well as whether you apply a numbing cream. The shorter the needle length, the less discomfort you will experience.
Applying a numbing cream pre-needling is advisable for lengths longer than 0.25mm. Applying a serum such as hyaluronic acid will also help lubricate your skin and may alleviate some discomfort during the microneedling process.
How often should I use my SKINDELUX device?
Microneedling can safely be performed every 4–6 weeks. For collagen induction you will require at least 3 treatments. Scar reduction requires between 3 and 6. 4–6 weeks should pass between one treatment and the next.
Which needle length should I be using?
The needle length you choose to use depends on the kind of results you are wishing to achieve.
1mm and below will help even out skin texture and hyperpigmentation, but won't be as effective for reducing scarring. This length is also perfect for those who wish to improve the efficacy of their serums as the ingredients will penetrate deeper into the skin. The deeper the product can get into your skin, the more effective it will be.
1mm – 2.5mm is recommended for those wishing to improve the appearance of acne scarring, fine lines and stretch marks. Remember, multiple treatments are required for improvement in the appearance of these issues, performed roughly once every 4 weeks.
Microneedling is a safe procedure, however, it's advisable you consult with your doctor prior to performing at-home microneedling treatments.
Which cartridge do I need?
There are 3 different cartridge options to choose from:
- 12 pin
- 36 pin
- Nano
The 12 pin is recommended for the face, while the 36 pin is more suitable for the body. The nano cartridge can be used regularly for improved serum absorption (scroll down to learn more about nano-needling).
What are the differences between the 12 pin, 16 pin, 36 pin and nano-needle cartridges? Which one do I need?
We recommend the 12 pin and 16 pin for the face. The 36 pin is recommended for the body (for stretch marks, for example).
Which body parts can you microneedle?
You can use the SKINDELUX microneedling device on your whole body. Popular areas include face, neck, décolletage and hips (for stretch marks).
What is nano-needling? How often can I nano-needle?
Nano-needling stimulates collagen production in the skin by infusing active ingredients through microscopic channels and allows up to 97% product absorption! This treatment combats similar concerns as microneedling such as reducing the appearance of fine lines, acne, hyperpigmentation, stretch marks, and other skin blemishes using your body's own natural repair response. You do not require numbing cream with this treatment as you won't be penetrating the skin deeply — and it is completely pain-free.
The main difference between microneedling and nano-needling is the depth that the needles penetrate into the skin. Nano-needling only punctures the first layer of the skin, while microneedling penetrates deeply into the dermis. If you are concerned about mild fine lines, pigmentation and uneven skin tone, then nano-needling is for you — it will help you get the most out of the ingredients of your infused serums. If your skin care concerns are deeper fine lines, deep acne scarring, stretch marks, loss of elasticity, hyperpigmentation and overall improved appearance of texture and tone, then microneedling is the treatment to choose.
You can nano-needle once per week with the depth set at 0.25mm.
What are the benefits of nano-needling?
- Increased smoothness and hydration
- Increased nutrient absorption from products
- Firmer looking skin
- Improved texture and tone
Can I microneedle my beard or scalp for hair growth? What is a derma stamp?
Yes — the same collagen-induction mechanism behind facial microneedling can help stimulate hair follicles on the beard and scalp. Our SKINDELÚX Adjustable Derma Stamp uses 120 stainless-steel pins with an adjustable needle depth up to 0.25mm, applied with a manual, non-electric stamping motion — easier to control than a roller on smaller or hard-to-reach areas like the jawline and hairline. As with any microneedling treatment, always sanitize the stamp before and after use, never share it unsterilized between users, and consult a doctor first if you're on blood thinners or have an active skin condition.
Professional & Salon Devices
Which AI skin analyzer should I choose — X3Pro, 3D AI Hair & Scalp Analyzer, or AISIA Q1?
All three use AI-powered multi-spectrum imaging to generate a detailed skin report in seconds, but they're built for different budgets and specialties:
| Model | Best for | Screen | Spectrum | Starting price |
|---|---|---|---|---|
| X3Pro | Entry into professional diagnostics — new studios and smaller clinics | 15.6" | 8-spectrum, 20 skin indicators | From $702 |
| 3D AI Hair & Scalp Analyzer | Salons and clinics focused on hair, scalp, and trichology services | 15.6" or 21.5" | 9-spectrum, 70x magnification probe | From $1,499 |
| AISIA Q1 | Flagship diagnostics for full-service salons, spas, and dermatology clinics | 15.6" or 21.5" | 8-spectrum with 3D facial imaging | From $1,899 |
If hair and scalp analysis is your main service, the 3D AI Hair & Scalp Analyzer's larger probe and 9-spectrum imaging are built for it. If you want the most complete, top-of-the-line diagnostic experience for a full-service clinic, the AISIA Q1 is our flagship. For everyone else getting started with professional AI skin analysis, the X3Pro is the most accessible entry point. See the full range in our Professional & Salon Equipment collection.
How much can I charge clients for an AI skin analysis?
Pricing varies a lot by market and how you bundle it. Many salons don't charge for the scan on its own — they use it as a fast, visual diagnostic that makes it easier to recommend (and sell) the right treatment or retail products, so the value shows up in higher treatment conversion rather than as a line item. Others charge a standalone consultation fee, especially for a first-visit deep analysis. Check what comparable salons in your area charge for a skin consultation as a starting point.
Do I need training or certification to operate an AI skin analyzer?
No special license is required to operate the analyzer itself — it's a guided, touchscreen workflow, and the AISIA Q1 and 3D AI Hair & Scalp Analyzer both include a built-in teaching center so new staff can start scanning clients with minimal onboarding. Any specific treatment you recommend off the back of a scan should still stay within your local esthetics licensing rules.
How many clients can I scan per day with one analyzer?
A single scan takes seconds to a couple of minutes depending on the model and report depth, so the machine itself isn't the bottleneck. Most salons run it as a quick add-on before or after a booked service rather than as its own appointment slot.
Which body sculpting machine should my salon choose — EMS Buttock & Thigh, RF Multi-Area, or EMSculpt Pro?
All three use HIEMT (High-Intensity Electromagnetic) technology, sometimes paired with RF, to stimulate muscle contractions for non-invasive toning and contouring:
| Model | Best for | Handles | Starting price |
|---|---|---|---|
| EMS Buttock & Thigh Sculpting Device | Smaller studios or home use — a focused, more affordable entry point | 2 handles, Manual + Automatic modes | From $399 |
| RF Multi-Area Body Contouring Machine | Salons wanting one machine that covers abdomen, arms, legs, hands, and buttocks | 2, 4, or 5 handles depending on setup | From $399 |
| EMSculpt Pro | Full-service clinics offering a premium, high-throughput sculpting service | 4 handles + dedicated pelvic floor cushion | From $599 |
A single-purpose, budget-friendly setup points to the EMS Buttock & Thigh device. A salon that needs to flex between multiple body areas and handle counts benefits most from the RF Multi-Area machine. Clinics that want the widest treatment range — including pelvic floor work — in one professional-grade unit should look at the EMSculpt Pro. All three are not intended to diagnose, treat, cure, or prevent any disease; clients with a medical condition should consult their doctor before treatment.
How much can I charge per EMS or RF body sculpting session?
Body sculpting is typically sold as a package of multiple sessions rather than a single visit, since visible toning builds gradually with repeated treatment. Pricing varies widely by market, session length, and how many areas are covered — research what comparable HIEMT/RF body contouring packages go for with local competitors before setting your menu price.
Do I need a license or certification to offer EMS/RF body sculpting treatments?
Requirements vary by country, state, and sometimes city — some jurisdictions regulate HIEMT/RF devices as aesthetic equipment with specific training or licensing rules. Check with your local esthetics or medical-spa licensing board before adding these treatments to your menu; SKINDELÚX doesn't provide legal or licensing guidance.
How does this compare to clinic-grade EMS systems that cost $50,000 or more?
Branded clinic-grade systems and SKINDELÚX's HIEMT/RF machines rely on the same underlying technology — electromagnetic muscle stimulation, sometimes paired with radiofrequency. The price gap mainly reflects brand, published clinical studies, manufacturer support infrastructure, and often higher power output on the premium systems, not a completely different mechanism. It's a real trade-off worth weighing against your budget and client expectations, not a claim that results are identical.
What is the SKINDELÚX Dual Plasma & Ozone Facial Wand, and who is it for?
It's a 2-in-1 professional device pairing an Instant Plasma handle for facial firming and texture with an Ozone Plasma handle for skin clarity, plus 7 interchangeable tips — designed for salons and spas that want both technologies on one countertop unit. As with our other plasma-based devices, it's intended for cosmetic use as part of a skincare routine, not to diagnose or treat any medical condition; anyone with a mole, skin lesion, or condition of medical concern should see a licensed dermatologist first.
How much can I charge for a plasma or ozone facial treatment?
Plasma and ozone facials are usually positioned as a premium add-on or standalone treatment, priced above a standard facial given the specialized equipment and results. Exact pricing depends heavily on your local market and how the treatment is bundled with other services — compare against what plasma/fibroblast and oxygen-facial treatments go for at nearby spas and clinics.
What does the SKINDELÚX Red Light Therapy Panel do, and which size do I need?
Our Red Light Therapy Panels combine 660nm red and 850nm near-infrared light to support the skin's natural collagen and elastin production, ease muscle recovery, and improve overall skin tone. The 500 suits targeted areas like the face and hands, the 1000 covers targeted-to-half-body treatments, and the 1500 is built for full-body sessions and can be daisy-chained with additional units for larger coverage. All three are FDA Class II registered.
How does the 6-in-1 Ultrasonic Cavitation RF Body Sculpting Machine work?
It combines radiofrequency, ultrasonic cavitation, and vacuum technology in one device to help contour and tighten skin, target stubborn areas, and support lymphatic drainage. It's used by estheticians in-studio and at home alike for regular body-sculpting sessions.
What is the Fibroblast Plasma Pen, and is it safe to use?
The Fibroblast Plasma Pen uses a small plasma arc to gently tighten and lift skin without cutting or injecting — commonly used for fine lines, mild sagging, and skin tag removal. Because it works directly on the skin's surface, we recommend reading our Safety Notice for Plasma Pen guide, and completing our Fibroblast: Techniques for Radiant Skin training if you're new to fibroblast treatments, before your first session.
What is BB Glow, and how long does the SKINDELÚX BB Glow Kit last?
BB Glow is a semi-permanent microneedling treatment that deposits a tinted, skin-perfecting serum into the upper layers of skin for an even, radiant, no-makeup-makeup finish. Results typically build over 2–4 sessions and last several weeks to a few months, depending on skin type and aftercare.
How does the IPL Laser Hair Removal Handset work, and how many sessions will I need?
IPL (Intense Pulsed Light) targets the pigment in hair follicles to reduce regrowth over time. Most people see visible reduction after 4–6 weekly sessions, with occasional maintenance treatments afterward. It's suitable for use on both the face and body at home.
What does the Oxygen Bubble Pen (CO2 Facial Rejuvenation Device) do?
The Oxygen Bubble Pen uses a gentle, carboxy-therapy-inspired bubbling action to boost circulation and oxygen delivery to the skin, helping serums absorb better and leaving skin looking brighter and more refreshed. It's compatible with our Oxygen Bubble Pen Refill Pods, available in 6 formulas for different skin concerns.
What is a high frequency facial wand used for?
High frequency uses a gentle electrical current to help calm acne-prone skin, reduce puffiness, and boost circulation for a more radiant complexion — a staple tool in many professional facials, now available for home use with the SKINDELÚX High Frequency Facial Wand.